15% Discount At Check Out
FBT MITUS 212 FSA Processed Flyable Active Subwoofer - 2x12" - 1200Wrms

FBT MITUS 212 FSA Processed Flyable Active Subwoofer - 2x12" - 1200Wrms

Item# MITUS-212-FSA

Product Description

The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked.

It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12 B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

  • Compact vented band pass subwoofer sharing the same width and hardware suspension of the MITUS 206LA
  • 320 mm (2 x 12) B&C neodymium magnet high excursion subwoofers with 75 mm (3) voice coils
  • Frequency Response from 45Hz to 120Hz
  • Class D amplifier delivering 1200WRMS
  • Switch mode power supply
  • DSP with 8 presets, cardioid and infra configurations, delay
  • Control panel with XLR input and link, volume, presets, delay, phase 0-180, ground-lift
  • 15 mm (5/8) birch plywood enclosure, scratch resistant black paint
  • Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations.
  • M20 top mount stand socket

  • Code: 31709
  • Configuration: 1 way
  • Built-in amplifier LF/HF: 1200 W RMS
  • Built-in amplifier peak LF/HF: 2400 W
  • Frequency response: 45Hz-120Hz -6dB
  • Low Frequency woofer: 2x12 - 3 coil - neodymium inch
  • High Frequency driver: - inch
  • Maximum SPL cont/peak: 134/138 half-space dB
  • Dispersion: omnidirectional HxV
  • Input impedance: 22 Kohm
  • Crossover Frequency: preset dependant KHz
  • AC Power requirements: 640 VA
  • Input connector: XLR with loop
  • Power cord: 5/16.4 m/ft
  • Net Dimension (WxHxD): 574x420x660 - 22.6x16.5x26 mm/inch
  • Net Weight: 36.5 - 80.5 kg/lb
  • Transport Dimension (WxHxD): 780x710x520 - 30.7x28x20.5 mm/inch
  • Transport Weight: 41 / 90.4 Kg/lb