|Cable Management Bar-Slotted, 2in Offset, 10-pak|
CMBS Series: Cable Management Bars, Stackable
Straight or offset rackmount bars aid cable organization. They can be combined and stacked on a horizontal plane for greater cable control. Each style (straight, 2 in. offset, 4 in. offset, or 6 in. offset) is sold in a pack of 10 units.
These cable bars can also be used to add support bracing for equipment when used with mid or rear rack rails.
• Straight or offset (2 in., 4 in. or 6 in.)
• Width: 19 in.
• Height: 0.625 in.
• Material: 16-gauge steel
• Finish: Black
• Multiple tie-down slots and holes
• Straight bar can be used alone or mounted at a right angle to another straight bar for dual-lacing configuration
• Offset bars are stackable on a horizontal plane to save rack space
COMPLIANCE & CERTIFICATION
• Made in the U.S.A.
• Certified U.S. steel
The rackmount cable management bar with lacing slots shall be Lowell Model ________, which shall be 16-gauge steel with a black powder epoxy finish. The bar shall measure approximately 19 inches wide by 0.625 inches high. It shall be _________ (straight, offset two inches, offset four inches, offset six inches).