15% Discount At Check Out
Lowell IM12P-TS100-3SW

Lowell IM12P-TS100-3SW

Lowell IM12P-TS100-3SW
Item# IM12P-TS100-3SW

Product Description


IM12P-TS100-3SW: 12 in. 150W Speaker (3 cf)


High performance, ready-to-install 150W flown rectangular speaker for suspended installations features 12 in. driver with transformer, 3 cu.ft. acoustic enclosure and white grille. Ideally suited to high ceiling/high energy applications like clubs and bars, sporting facilities, concourses, hotel ballrooms and exhibit halls.



  • Pro sound


  • Driver (12P150):  12 in. (8 ohm) 150W driver with robust motor structure, 38 oz. magnet, 2 in. voice coil and coaxially mounted high frequency compression driver for high power handling with excellent efficiency. A steel plate is mounted over the driver to protect it during shipping and installation. Remove it to mount the grille. See the driver spec sheet for more information.
  • Transformer (TLS-10070):  70V 100W transformer for superior music fidelity in 70V distributed applications. This 20/20 AudioVisionTM transformer offers true 20Hz-20kHz performance. A screwdriver-adjustable tap selector switch is accessible behind the grille.  Note: Lowell 20/20 AudioVision™ transformers have full frequency response and high power handling which allows the speaker to operate at full potential while providing a stable load to the amplifier. The transformer allows a distributed speaker system to sound imperceptibly the same as a transformer-less direct-to-voice-coil system but with easier wiring, reduced labor and less expense.
  • Grille:  Square perforated steel grille with white powder epoxy finish is ideal for applications where the speaker is suspended in a tile, sheetrock or plaster ceiling. 15.25 in. square x 0.375 in.
  • Enclosure:  3 cu.ft. precision-formed steel enclosure (23.94 in. x 18.19 in. x 12 in.) features anti-vibration ribs, sound-stop board, 1-1/2 in. thick premium acoustic lining and forged 1/4 in.–20 eyebolts screwed into mounting nuts for secure suspended installation (using flyware by others). Externally accessible connections are terminated through a 4 in. x 4 in. flush cover plate. Black powder epoxy finish. NOTE: For plenum space with limited height, a 2 cu.ft. enclosure is also available. Call for model no. and pricing.


  • Certified U.S. steel (grille, enclosure)
  • Made in U.S.A. with global components


  • The 150W flown rectangular speaker for suspended installation shall be Lowell iMount® Model IM12P-TS100-3SW which shall feature a 12 in. (8 ohm) 150W driver mounted in a black steel acoustic enclosure (23.94 in. x 18.19 in. x 12 in., 3 cu.ft. volume) with anti-vibration ribs, sound-stop board, 1-1/2 inch thick acoustic lining, and forged 1/4 inch-20 eyebolts screwed into mounting nuts for suspended installation using flyware by others. It shall include a perforated steel architectural grille with white finish. System frequency response shall be 49Hz–10.1kHz (±6dB) and 45Hz– 20kHZ (±7.7dB) with average sensitivity of 96.1dB @1W/1M. Dispersion shall be 65 degrees conical @2kHz octave measured 6dB down. The system shall have a driver with 38 oz. magnet, 2 in. voice coil, and coaxially mounted high frequency compression driver. The speaker shall include a wired 70V 100W transformer with screwdriver-adjustable tap selections accessible behind the white steel grille.