15% Discount At Check Out
Lowell LPSR-1226GT

Lowell LPSR-1226GT

Lowell LPSR-1226GT
Item# LPSR-1226GT

Product Description


LPSR-1226GT: Pull-out Studio Rack with Grey Top 12U x 26?D

12U x 26"D rollout studio rack, premium top has a 15-degree sloped front which allows easy viewing of electronics from a seated position. Swivel casters. Rack features a hideaway front door.

SPECIFICATIONS (rack without casters or premium top)

  • Rack Space: 12U (angled)
  • Height: 25.98 in.
  • Width: 23.00 in.
  • Depth: 25.52 in.


  • Premium Laminate Top (1 in. x 20.25 in. x 23.75 in.)
  • 18-gauge steel construction reinforced at all load-bearing junctions
  • Welded sides and top
  • 12U mounting space on 15-degree angle
  • Hideaway front door with key lock opens from top and slides into base
  • Rear access cover with key lock and cable ports
  • Decorator style cutouts on front for mounting (optional) switches
  • One pair fixed-position mounting rails
  • Rear mounting holes on EIA spacing with 10-32 Tinnerman clips
  • Black wrinkle powder epoxy finish
  • Load capacity 250 lbs.


  • EIA/TIA compliant
  • RoHS compliant
  • Certified U.S. steel
  • Made in Missouri, U.S.A.


  • The EIA/TIA compliant rack shall be Lowell Model No. LPSR-1226GT, which shall measure 25.98 in. high (without casters or laminate top) x 23 in. wide x 25.52 in. deep at the base. It shall include a laminate top with rubber edge molding (20.25 in. deep x 23.75 in. wide x 1 in. high). The rack shall be fully welded 18-gauge steel construction reinforced at all loadbearing junctures. It shall provide 12U mounting space on a 15-degree slope with each level providing a different depth for equipment. It shall have a load capacity of 250 lbs. [113 kg]. The rack shall include integral side handles, swivel casters, hideaway front door with keyed lock, rear access cover with keyed lock and cable entry ports, two front decorator style cutouts with cover plates for external access to mounted switches (not included), one-pair of fixed position front mounting rails tapped 10-32, and rear mounting holes with 10-32 Tinnerman clips. Vents for natural heat dissipation shall be provided on sides and front door. Finish shall be black wrinkle powder epoxy.