Up To 15% Discount At Check Out
Lowell LTCR-3320S
Zoom

Lowell LTCR-3320S

Lowell LTCR-3320S
Item# LTCR-3320S
$1,013.50
$1,151.70
Availability:

Product Description

 

LTCR-3320S: Tilt-out Controlled-release Rack 3U+3U, surface-mount

 
Ideal for amplifiers, small mixers, PA systems or consumer electronics, the rack features oil-filled dampers to provide a slow, controlled release when opening the main compartment, where equipment is mounted vertically. Top compartment is hinged for swing-out access. Surface-mount.
 

SPECIFICATIONS

  • Rack Space:  3U (top) + 3U (main)
  • Height:  34.06 in.
  • Width:  25.00 in.
  • Depth:  6.015 in.

FEATURES

  • 3U top compartment (horizontal hold) is ideal for a 19 in. panel. Hinge on door allows swing-open access. Fixed rails pivot down for easier access to cables.
  • 3U main compartment (vertical hold) for equipment up to 5.25 in. x 15.3 in. x 19 in. Opens with dampers to control rate of descent. Includes fixed rails and a removable shelf.
  • Both compartments secure with a single lock
  • Backbox with keyholes on 16 in. centers
  • Knockouts in top, bottom, rear
  • Vents at bottom and along integral formed handle
  • 1 in. cable raceway on each side
  • E.O. box in base
  • Load capacity 50 lbs.
  • Network Grey finish

COMPLIANCE & CERTIFICATION

  • EIA/TIA compliant
  • RoHS compliant
  • Certified U.S. steel
  • Made in Missouri, U.S.A.


A&E SPECIFICATIONS

  • The surface-mount wall rack with tilt-out operation shall be Lowell Model LTCR-3320S which shall measure 25.00”W x 34.06”H and project 6.015 in. from wall.  Construction shall be steel with front/bottom vents and a neutral Network Grey powder epoxy finish. The assembly shall include a backbox and two compartments to mount 19" equipment. The backbox shall feature knockouts in top, bottom, and rear. Oil-filled dampers shall control lowering of equipment when opened. A removable shelf shall be included. The main compartment shall mount equipment measuring up to 5.25" (3U) x 15.3" deep and store it in a vertical position. The top compartment shall mount equipment up to 5.25" (3U) x 4.3" deep. The assembly shall have a load capacity of 50 lbs. and include a single gang EO?box in the base.