RCC-3436: Remote Consolidation Cabinet 3U+4U x 36?H
Low profile wall-mount cabinet secures 19” E.I.A. network equipment with minimal intrusion into the room. The cabinet maximizes internal space by providing two mounting bays with separate rail sets. The 3U top bay allows pivot-down access for a horizontally-mounted panel such as a shallow patch panel (not included). The 4U bottom bay features rails to vertically-mount hubs, servers, or similar active equipment.
Rack Space: 3U horizontal plus 4U vertical
Measurements: 25.5”W x 36”H (30.2”D usable) x 7.5”D
16-gauge steel construction with rear cutouts to fit over wall obstructions and aid cable management.
11-gauge rails in the 3U top section will accommodate a shallow patch panel. Rails pivot down for access.
11-gauge rails in the 4U bottom section will vertically-mount 19” equipment.
Dual-punch rails: All rails have holes tapped 10-32 (for use with included screws) plus square openings for alternate hardware (12-24 or 6mm screws, not included).
Vented front door with beveled edges and inset handle
Knockouts in top and base
Multiple bridge lances
Vents in base accommodate (optional) single fan kits
Includes E.O. box in base
Side key lock
Network Grey powder epoxy finish
Load Capacity: 150 lbs.
COMPLIANCE & CERTIFICATION
Certified U.S. steel
Made in Missouri, U.S.A.
The wall-mount cabinet shall be Lowell Model No. RCC-3436, which shall feature two mounting areas. Overall measurements shall be 25.5 x 36 x 7.5 inches. The 3U top section shall have 11-gauge rails that allow pivot-down access for a horizontally-mounted shallow panel (not included). The 4U bottom section shall have 11-gauge adjustable rails to vertically-mount 19” equipment up to 30.2 inches deep. The cabinet shall feature knockouts and bridge lances for cable management. The shallow front door shall have vents, beveled edges and an inset handle. The door shall be field-reversible for left or right-hand swing. The cabinet shall be made in the U.S.A. with certified U.S. steel finished in Network Grey powder epoxy paint. It shall include an E.O. box in the base and a side lock.