RCCD-4636: Remote Cabinet w/Deep-door 4U+6U x 36?H
Wall-mount cabinet maximizes rack space with dual bays — 4U upper bay with pivoting rails, 6U lower bay with adjustable rails. Upper bay can be reached without opening main compartment
UPPER BAY Rack Space (horizontal-mount): 4U x 4.97"D usable
LOWER BAY Rack Space (vertical-mount): 6U x 30.2"D usable
OVERALL Measurements: 25.5”W x 36”H x 11.187”D
16-gauge steel construction with rear cutouts to fit over wall obstructions and aid cable management.
11-gauge rails in the 4U top section accommodate (horizontally-mounted) panel, such as a shallow patch panel. Rails, tapped 10-32, pivot down for access.
11-gauge rails in the 6U bottom section vertically-mount 19” equipment. Rails, tapped 10-32, can be adjusted (vertically) to accommodate equipment up to 30.2”D.
Deep door features beveled edges, vents, and sloped top with hinge for quick access to top section without opening main compartment. Key lock.
Knockouts in top, base, side
Multiple bridge lances
Vents in base accommodate (optional) single fan kits
Includes electrical box in base
Side key lock
Network Grey powder epoxy finish
Load Capacity: 150 lbs.
COMPLIANCE & CERTIFICATION
Certified U.S. steel
Made in Missouri, U.S.A.
The wall-mount cabinet shall be Lowell Model No. RCCD-4636, which shall feature two mounting areas. Overall measurements shall be 25.5”W x 36”H (30.2”D usable) x 11.187”D. The 4U top section shall have 11-gauge rails that allow pivot-down access. The 6U bottom section shall have 11-gauge adjustable rails to vertically-mount 19” equipment. Rails shall be tapped 10-32 and also have square openings to allow the use of 12-24 or 6mm screws and cage nuts (not included). The deep front door shall have vents, beveled edges, and a sloped top that opens on a hinge to allow quick access to top section without opening main compartment. The cabinet shall feature knockouts and bridge lances for cable management. The cabinet shall be made in the U.S.A. with certified U.S. steel finished in Network Grey powder epoxy paint. It shall include an E.O. box in the base and a side lock.