Remote power control with pass-through jacks for labor-saving installation and quick changes to sequencing order via the onboard step selection switch. Note that sequencer SEQ-P4 is required to activate RPC-P Series remote power controls (order separately).
Chassis: Steel with black finish, 7.5 in. x 3.25 in. x 2.75 in
Power Rating: 125VAC, 20A
Power Inlet: NEMA 5-15P (6 ft. cord)
Power Outlets: NEMA 5-20R duplex
RJ45 jacks (2)
DIP Switch: Because the sequence step is selected via the switch on each RPC-P unit, the startup sequence can be quickly modified without re-wiring.
Activation: This model requires sequencer (#SEQ-P4) with an external trigger (SPST switch or DSP voltage connection) for activation.
Multiple RPC-P units can be connected to each other (or compatible relays) to control all from a single location (up to 20 RPC-P units per step)
This model includes surge suppression (20,000A max. surge current)
COMPLIANCE & CERTIFICATION
ETL Listed (U.S., Canada)
Made in U.S.A. with global components
The device for remotely controlling AC power shall be Lowell model #RPC-P20-SCD, which shall be a 7.5"L x 3.25"W x 2.75"H steel chassis with black powder epoxy finish. The remote power control shall feature RJ45 jacks and 20A duplex power outlet. Power rating shall be 20A. Power input shall be via 6 ft. cord with NEMA plug. The unit shall also feature surge suppression up to 20,000A.