15% Discount At Check Out
Martin MAC Aura XB White

Martin MAC Aura XB White

Item# 90232105

Product Description


The MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash™. Not only does the MAC Aura XB offer additional brightness, it also features a new superior color mixing system and an optimized lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effect™ is also part of the package.

  • Super bright single lens wash with fully premixed color
  • Compact design and low weight
  • High efficiency, low power consumption, long service life
  • Super-bright single-lens wash with fully premixed color
  • Broad color palette, RGBW color mixing
  • Eye-candy Aura Effect™
  • Uniform shades
  • Built-in FX engine
  • 10 to 60° uniform zoom
  • 6000 Lumens output
  • Rapid movement
  • Compact, low weight design (6.5 kg)
  • High efficiency, low power consumption, long lifetime
Tech Specs

Length (across yoke): 302 mm (11.9 in.) Width (across yoke): 302 mm (11.9 in.) Height (head straight up): 360 mm (14.2 in.) Weight (without accessories): 6.5 kg (14.4 lbs.)
Dynamic Effects
Beam color mixing: RGBW Aura (secondary lens array illumination) color mixing: RGB Beam color temperature control: CTO, variable 10 000 - 2500 K Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects Pre-programmed effects: Range of independent and synchronized Beam and Aura FX, two combinable Electronic dimming: Independent beam and aura, four dimming curve options Zoom: 10° - 60° (one-tenth peak angle) Pan: 540° Tilt: 232° Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
Control options: Independent or synchronized Beam and Aura control Control system: DMX, RDM Control resolution: 8-bit, with 16-bit control of pan & tilt DMX channels: 14/25 Setting and addressing: Control panel with backlit graphic display DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: RS-485 Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics and Photometric Data
Light source: 19x 15W RGBW LED Array System LED refresh rate: Beam 1200 Hz, Aura 4395 Hz Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Total luminous output (wide, one-tenth peak): 6000 lumens Total luminous output (narrow, one-tenth peak): 4300 lumens Video compatibility: Designed for use with HD/high-speed video cameras *Figure obtained under manufacturer´s test conditions
Color: Black Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA Protection rating: IP20
Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket Orientation: Any Minimum distance to combustible materials: 200 mm (8 in.) from fixture Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture Location: Indoor use only, must be fastened to surface or structure
AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector DMX data in/out: 5-pin locking XLR
Maximum power consumption: 400 W Power supply unit: Auto-ranging electronic switch mode AC power: 100-240 V nominal, 50/60 Hz Typical half-cycle RMS inrush current: 10.7 A Power consumption, all effects static, zero light output: <25 W
Typical Power and Current
100 V, 60 Hz: 359 W, 3.8 A, PF 0.99 120 V, 60 Hz: 355 W, 3.2 A, PF 0.99 208 V, 60 Hz: 350 W, 1.8 A, PF 0.97 230 V, 50 Hz: 349 W, 1.7 A, PF 0.95 240 V, 50 Hz: 349 W, 1.6 A, PF 0.95 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
CE ETL C US Intertek C-Tick
Included Items
M12 bolt suitable for use with Martin rigging clamps Note that power cables and connectors are not included and must be ordered separately
Power cables Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power Throughput Cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784 Power Throughput Cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785 Power Throughput Cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796 Power connectors Cable connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789 Cable Connector, Neutrik PowerCON TRUE1 NAC3MX-W (male): P/N 91611788 Installation hardware Quick surface mounting bracket for MAC Aura XB, set of 5: P/N 91606018 G-clamp: P/N 91602003 Half-coupler (tube) clamp: P/N 91602005 Quick trigger clamp: P/N 91602007 Flightcase 6-unit flightcase for MAC Aura™: P/N 91515020 Optical Accessories MAC Aura / Aura XB Soft Lens Kit: P/N 91611730
Related Items
Martin USB Duo™ DMX Interface Box: P/N 90703010 Martin DMX 5.3 Splitter™: P/N 90758140 Martin RDM 5.5 Splitter™: P/N 90758150
Ordering Information
MAC Aura XB™ in cardboard box: P/N 90232100 MAC Aura XB™ in 6-unit flightcase: P/N 90232110