Martin RUSH MH 2 Wash
Compact yet powerful, this fast and agile LED wash light moving head features RGBW color mixing. Unique wash beam effects are possible with auto trig shows and music trig sound activation.
Length: 258 mm (10.2 in.) Width: 156 mm (6.2 in.) Height: 305 mm (12.0 in.) Weight: 5.7 kg (12.6 lbs.)
Color mixing: RGBW Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout Electronic dimming: 0 - 100%, four dimming curve options Pan: 540° Tilt: 180°
Control and Programming
Control options: DMX, stand-alone DMX channels: 12 Stand-alone trigger options: Music trig, auto trig Stand-alone options: 4 pre-programmed shows Stand-alone memory: 20 scenes White balance control: RGB adjustment Setting and addressing: Control panel with LCD display Protocol: USITT DMX512/1990
Light source: 7 x 10 W RGBW Cree MC-E LEDs Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Mounting points: Hex bolts Location: Indoor use only, must be fastened to surface or structure Orientation: Any
AC power in/thru: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
AC power: 100-240 V nominal, 50/60 Hz Typical total power consumption: 125 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
110 V, 60 Hz: 1.9 A, 125 W 230 V, 50 Hz: 1.0 A, 121 W Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 430 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
CE ETL C US Intertek
Power cable 1.5 m Bracket for rigging clamp attachment: P/N 50480564
RUSH™ Software Uploader 1: P/N 91611399
RUSH MH 2 Wash™ in cardboard box: P/N 90280020