15% Discount At Check Out
Martin VC-Grid 16x16 15 RGB

Martin VC-Grid 16x16 15 RGB

Item# 90357540

Product Description


The VC-Grid 15 is a small, 240 x 240 mm LED video module with a 15 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling

  • Wide range of pixel pitches to suit every application
  • Easy cabling, mapping and configuration
  • Bright and fully calibrated for optimal consistency
  • 256 individually controllable pixels
  • 5000 nits of brightness
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Combined power/data thru (to daisy-chain multiple VC-Grids)
  • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
  • Custom designs available on request (pixel pitch and module dimensions)
Tech Specs
Length: 240 mm (9.5 in.) * Width: 240 mm (9.5 in.) * Height: 15 mm (0.6 in.) Weight: 311 g (0.7 lbs.) *Including 5 mm (0.2 in.) board-to-board gap
Control and Programming
Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX Protocol detection: Automatic Control modes: Calibrated and raw, pixel and module DMX channels: 192 (segment mode) or 3 (module mode) Setting and addressing: P3 System Controller or RDM-compliant controller Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color Color and intensity calibration: Pixel-level DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Via P3 System Controller
Control/User Interface
Device status: Multi-color visual indication Device test and reset: Pushbutton to call up local test patterns and reset device
Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer´s test conditions
Photometric Data
Pixels per module: 256 Luminous intensity, calibrated mode: 5000 Nit Luminous intensity, raw mode: 6000 Nit Viewing angle: 120° x 120° Preliminary data, figures are approximate
Video Processing
Brightness control Gamma correction and control Color temperature control Color gamut control Calibration processing Synchronization
Base: Black FR4 circuit board Transparency through module (unmasked area): 0% Protection rating: IP20 RoHS compliant
Orientation: Any Maximum number of VC-Grid™ 16x16 15 modules per daisy-chain: 4 Mounting: Mounting holes in module
Power & data input: 4-pin Molex connector Power & data thru: 4-pin Molex connector
Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU Peak power consumption (at full intensity, full white): 60 W Typical power consumption (with typical video content): 20 W Figures for typical video content are indicative only and will vary
Cooling: Convection Maximum ambient temperature (Ta max.): 45° C Minimum ambient temperature (Ta min.): -20° C Peak heat dissipation (calculated, at full intensity, full white): 205 BTU/hr. Typical heat dissipation (calculated, with typical video content): 70 BTU/hr. Figures for typical video content are indicative only and will vary
EU safety: EN 60950 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1
CE ETL C US Intertek
VC-Grid 15/30/60 Mounting Frames, set of 10: P/N 91611560 Input cables Hybrid Input Adapter Cable, 4-pin male XLR to PCB, 0.25 m: P/N 11840158 Hybrid Input Adapter Cable, 5-pin m. XLR + power to 4-pin fem. XLR, 0.25 m: P/N 11840171 Hybrid Input Adapter Cable, 5-pin m. XLR + Tripix Power IP66 to 4-pin fem. XLR, 0.25 m: P/N 11840194 VC-Grid to VC-Grid link cables Hybrid Link Cable, PCB to PCB, 200 mm: P/N 11840160 Hybrid Link Cable, PCB to PCB, 400 mm: P/N 11840161 Hybrid Link Cable, PCB to PCB, 600 mm: P/N 11840162 Hybrid Link Cable, PCB to PCB, 800 mm: P/N 11840163 Hybrid Link Cable, PCB to PCB, 1000 mm: P/N 11840157 Extension cables Hybrid 4-pin XLR Extension Cable, 1 m: P/N 11821016 Hybrid 4-pin XLR Extension Cable, 2.5 m: 11821017 Hybrid 4-pin XLR Extension Cable, 5 m: P/N 11821018 Hybrid 4-pin XLR Extension Cable, 10 m: P/N 11821019 Hybrid 4-pin XLR Extension Cable, 25 m: P/N 11821015 Output/throughput cables Hybrid Output/Thru Cable, PCB to 4-pin fem. XLR, 0.25 m: P/N 11840159 Data Output/Thru Cable, 4-pin m. XLR to 5-pin fem. XLR, 0.25 m: P/N 11840203 Hybrid cables carry both power and data
Related Items
Martin P3 PowerPort 1500™: P/N 90721040 Martin P3-100™ System Controller: P/N 90721010 Martin P3-200™ System Controller: P/N 90721020 Martin P3-PC™ System Controller: P/N 90721030 Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330
Ordering Information
VC-Grid™ 16x16 15 RGB: P/N 90357540