Home > Search By Brands > PreSonus > PreSonus Loud speakers > PreSonus AIR10

PreSonus AIR10

PreSonus AIR10

Product Description


AIR10 AIR10: Versatile, customizable, and easy to transport. Compact and lightweight, AIR10 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR10 gives you all the power and tools you need for both mobile and installed sound.

Features Main Components Hybrid “best of both worlds” 1,200W (peak) power amp configuration: Low-frequency driver: 900W, Class D amplifier High-frequency driver: 300W, Class A/B amplifier Maximum SPL 121 dB peak 1-inch, high-frequency compression driver 10-inch woofer with a 2-inch voice coil 66 Hz to 20 kHz frequency response 121 dB SPL (max) 90° x 60° (horizontal x vertical) dispersion pattern Onboard mixer with two combo XLR and Ľ” inputs and one summed balanced output Controls Easy-to-use DSP performance presets: DJ — music playback FOH — normal front-of-house Enhance – enhanced low end for a warmer sound Monitor — optimized for floor wedge placement Speech — applications where speech intelligibility is critical Additional presets and controls: Stand — for mounting on a pole or tripod Bracket — for wall-mount applications Suspend — for suspended applications Convenience Features Multi-angle enclosure for mains or monitor-wedge applications Comfortable ergonomic handle 35 mm pole socket with 7.5? downward tilt M10 rigging points for suspended installation Defeatable front-panel LED Rugged plastic enclosure Tour-grade, 1.2 mm steel grille

Computer system requirements: Below are the minimum computer-system requirements for StudioLive 16.0.2 USB. macOS® macOS version 10.13 or later 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates) Available USB port Windows® Windows 10 or later (64-Bit Only) 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support) Available USB port The above are the hardware system requirements for this product. DAW software and Operating System requirements vary. Click here for Studio One’s system requirements. VST Compatible Logo ASIO Compatible Logo VST is a registered trademark of Steinberg Media Technologies GmbH ASIO is a trademark and software of Steinberg Media Technologies GmbH USB-C® is a registered trademark of USB Implementers Forum All other trademarks are property of their respective holders Technical Specifications Microphone Preamp Type XLR Female, Balanced Frequency Response to Direct Output (at unity gain) 20 Hz-20 kHz, 0 / -0.5 dBu Frequency Response to Main Output (at unity gain) 20 Hz-20 kHz, ±0.5 dBu Input Impedance (Balanced) 1 k? THD to Direct Output (1 kHz at unity gain) <0.005%, +4 dBu, 20 Hz–20 kHz, unity gain, unwtd THD to Main Output (1 kHz at unity gain) 0.005%, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd EIN to Direct Output +125 dB unwtd, +130 dB A-wtd S/N Ratio to Direct Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd) -102 dB S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd) -95 dB Common Mode Rejection Ratio (1 kHz at unity gain) +65 dB Gain Control Range (± 1 dB) -16 dB to +67 dB Maximum Input Level (unity gain) +16 dBu Phantom Power (± 2 VDC) +48 VDC Line Inputs, Balanced Type Ľ" TRS Female, balanced mono Frequency Response to Direct Outputs (at unity gain) 10 Hz-20 kHz, 0 / -0.5 dBu Frequency Response to Main Outputs (at unity gain) 20 Hz-20 kHz, 0/-0.5 dBu Input Impedance 10 k? THD to Direct Output (1 kHz at unity gain) <0.0007%, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd THD to Main Output (1 kHz at unity gain) <0.005%, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd S/N Ratio to Direct Output (Ref = +4 dBu, 20 kHz BW, unity gain, A-wtd) -105 dB S/N Ratio to Main Output (Ref = +4 dBu, 20 kHz BW, unity gain, A-wtd) -95 dB Gain Control Range (± 1 dB) -20 dB to +20 dB Maximum Input level (unity gain) +22 dBu Line Inputs, Unbalanced Type RCA Female, unbalanced (stereo pair) Maximum Input Level +22 dBu Main Outputs Type XLR Male, balanced (stereo pair); Ľ” TRS Female, balanced (stereo pair) Rated Output Level +24 dBu Output Impedance 100? Aux Outputs Type Ľ” TRS Female, balanced (mono) Rated Output Level +18 dBu Output Impedance 100? Monitor Outputs Type Ľ” TRS Female, balanced (stereo pair) Rated Output Level z +18 dBu Output Impedance 100? System Crosstalk Input to Output (Ref = +4 dBu, 20 Hz-20 kHz, unwtd) -90 dBu Adjacent Channels (Ref = +4 dBu, 20 Hz-20 kHz, unwtd) -87 dBu Noise Gate (Expander) Threshold Range -84 dB to 0 dB Attack Time Adaptive (0.2 - 2.5 ms) Release Time 70 ms Expander Attenuation Range 2:1 Compressor Threshold Range -56 dB to 0 dB Ratio 1:1 to 14:1 Response Time (Attack/Release 0.2 ms / 1.0s (“Tight”) to 180 ms / 1.0s (“Smooth”) Auto Attack and Release Attack = 10 ms, Release = 150 ms Curve Types hard and soft knee EQ Type 2nd-order shelving filter (Q = 0.55) Low (Low-pass or Bandpass) 36 to 465 Hz, ±15 dB Mid 260 Hz to 3.5 kHz, ±15 dB High (High-pass or Bandpass) 1.4 kHz to 18 kHz, ±15 dB Digital Audio Host Interface USB 2.0 ADC Dynamic Range (A-wtd, 48 kHz) 118 dB DAC Dynamic Range (A-wtd, 48 kHz) 118 dB Internal Processing 32-bit, floating point Sampling Rate 44.1, 48 kHz A/D/A Bit Depth 24 bits Reference Level for 0 dBFS +18 dBu Clock Jitter <20 ps rms (20 Hz - 20 kHz) Jitter Attenuation >60 dB (1 ns in ? 1 ps out) Power Connector IEC Input-Voltage Range 100 to 240 VAC (factory-configured for country of destination) Power Requirements (continuous) 100W Physical Length 15.56 inches (397 mm) Width 16 inches (406 mm) Maximum Height 5.5 inches (140 mm) Weight 20 lbs. As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.