Home > Search By Brands > Sennheiser > Sennheiser Wired Microphones > Sennheiser MEB 114-S W

Sennheiser MEB 114-S W

Product Description


MEB 114-S W Wired table boundary microphone with half-cardioid pickup pattern. Thanks to its sturdy housing and high-quality microphone capsule, the MEB-S 114 guarantees optimum speech intelligibility. The MEB 114-S has a programmable microphone button (PTT, PTM, Toggle on/off, Permanent on) and a two-color LED ring as a status indicator. The TTL logic output on the underside can be used to activate a camera or media control system. The model is available in black and white color.

MEB 114-S W

Wired table boundary microphone with half-cardioid pickup pattern. Thanks to its sturdy housing and high-quality microphone capsule, the MEB-S 114 guarantees optimum speech intelligibility. The MEB 114-S has a programmable microphone button (PTT, PTM, Toggle on/off, Permanent on) and a two-color LED ring as a status indicator. The TTL logic output on the underside can be used to activate a camera or media control system. The model is available in black and white color.


Overview The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility. Features Microphone modes Toggle on/off Push to mute Push to talk permanent on (external LED control) What's in the box? MEB 114 Microphone Quickguide Cable

Technical Data Color black white nextel grey LED light ring: red / green Dimensions 3.34 x 3.93 x 0.98 in (W x D x H) Connector clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal) Frequency response 40 Hz – 20 kHz Max. sound pressure level 140 dB Transducer principle pre-polarized condenser microphone Weight 10.26 oz Pick-up pattern cardioid Nominal impedance 200 ? Phantom powering P 24 - P 48 Operating temperature 14 ° to 122 ° F Equivalent noise level 29 dB (A) Equivalent noise level weighted as per CCIR 468-3 39 dB (CCIR) Current consumption 5.3 mA Output voltage Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V Output voltage Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V Acoustics boundary layer microphone Dynamic range 111 dB (A) Sensitivity 10 mV/Pa

Overview

The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.

Features

Microphone modes
Toggle on/off
Push to mute
Push to talk
permanent on (external LED control)

What's in the box?

MEB 114 Microphone
Quickguide
Cable

Technical Data

Color

black

white

nextel grey

LED light ring: red / green
Dimensions

3.34 x 3.93 x 0.98 in (W x D x H)
Connector

clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
- Frequency response
  
  40 Hz – 20 kHz
- Max. sound pressure level
  
  140 dB
- Transducer principle
  
  pre-polarized condenser microphone
- Weight
  
  10.26 oz
- Pick-up pattern
  
  cardioid
- Nominal impedance
  
  200 ?
- Phantom powering
  
  P 24 - P 48
- Operating temperature
  
  14 ° to 122 ° F
- Equivalent noise level
  
  29 dB (A)
- Equivalent noise level weighted as per CCIR 468-3
  
  39 dB (CCIR)
- Current consumption
  
  5.3 mA
- Output voltage
  
  Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V
- Output voltage
  
  Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
- Acoustics
  
  boundary layer microphone
- Dynamic range
  
  111 dB (A)
- Sensitivity
  
  10 mV/Pa